Options

Options Available.

AVAILABLE OPTIONS (SOME OPTIONS NOT APPLICABLE TO ALL MODELS)
Many other features/options available, if it’s possible, we can do it
A1 Water Cooled Condenser
COLORS
Custom Colors available for OEM customers
CONTROLS
E1 Control Package e1 include Touch Screen Control
-Level Low   – Mute  – Normal screen GREEN/RED on fault
-Low Flow
-Temperature Alarm
-Cooling on LED
-Relay contact open on fault (NC dry), via DB9-F, pins 1 & 9
-Remote start/stop on DB9-F, pins 3 & 7
-Auto restart when in REMOTE mode on power loss
-RUN on FAULT version available
E2 RS-232 Interface with temp controller VIA USB/LAN *& PC based software
E3 RS-484 Interface with temp controller with PC based software
E4 Analog remote control 1-5, 0-5 or 0-10VDC of temp controller
E5 Devicenet communication with temp controller
E6 E1 with an additional input, i.e. pressure switch, etc
EM Energy meter
RV Return temperature display option, not available for all units
HM Hour meter
POWER
C1 100-120VAC 50/60 Hz
 C2  200-230VAC 50/60 Hz, Single phase
C3  200V-240V50 Hz, Single phase
C5  200V-20V50/60 Hz, Three phase
C6 440-480VAC, Three phase
C7 380-460VAC, Three phase, 50 Hz
FLUID MAINTENANCE
G1 DI (500kΩ-2MΩ) resistivity status LED, filter & plumbing; includes replaceable DI Cartridge
G2 Resistivity meter (0-20MΩ) an add-on w/G1 option
G3 80C DI (50kΩ – 2MΩ) resistivity status LED, filter & plumbing; includes replaceable DI Cartridge
G4 G1 + G2 solenoid control of resistivity level
F1 Stainless steel/plastic plumbing (1/2″) (up to 10 GPM)
H1 Particle Filter (5 microns) 1/2″ NPT
H2 Particle Filter (30 microns) 1/2″ NPT
H4 Particle Filter (30 microns) 3/4″ NPT
H5 Particle Filter SS housing  (30 microns) 3/4″ port
H6 Particle Filter  (5 microns) 80C compatible  1/2″ NPT
H7 Particle Filter  (30 microns) 80C compatible  1/2″ NPT
H8 Particle Filter  (30 microns) 20 GPM compatible 3/4″ NPT
FLUID MEASUREMENT & CONTROL
B1/2 2nd supply & return loop with flow switch, 1/2″ NPT
B3/4 2nd supply & return loop with flow switch, 3/4″ NPT
FB1/2 Anti flood back kit 1/2″
FB3/4 Anti flood back kit 3/4″
FB1/2SS SS Anti flood back kit 1/2″
FB3./4SS SSAnti flood back kit 3/4″
FBS Solenoid controlled anti-flood back system
J0 Flow Meter with flow control (0.2-1.5 GPM) 1/2″ NPT
J1 Flow Meter with flow control (0.5-2.5 GPM) 1/2″ NPT
J3 Flow Meter with flow control (20 GPM) 1″ NPT
J4 Flow Meter with flow control (40 GPM) 1″  or 2″ NPT
J5 Flow Meter with flow control (1040 GPM) 1.5″  or 2″ NPT
J6 0-5 GPM digital flow display with flow control adjustment
J7 0-10 GPM digital flow display with flow control adjustment
J8 1.5-19 GPM digital flow display with flow control adjustment
J9 4-40 GPM digital flow display with flow control adjustment
K5 Heater 500 watts Stainless sheath type in reservoir
K10 Heater 1000 watts Stainless sheath type in reservoir
K20 Heater 2000 watts Stainless sheath type
K50 Heater 5000 watts Stainless sheath type
KS Custom Heater
KC Heater with separate control
L1 Auto fill with redundant safety 1/4″ ports for supply & return
PD Pulsation dampener on supply line Brass
PR Pressure Regulating valve, for limiting supply pressure
PUMPS
 PS Special or custom pump
 P2 Positive displacement pump-Brass 4.0 GPM
 P3  Positive displacement pump-SS-2.2 GPM
 P4  Positive displacement pump-SS-4.0 GPM
 P5 Turbine type pump BRASS 5 GPM @ 60PSI
 P6  Turbine type pump BRASS 10 GPM @ 60PSI
 P7  Turbine type pump BRASS 15 GPM @ 60PSI
 P8  Turbine type pump SS 15 GPM @ 60PSI
 P9  Turbine type pump BRASS 20 GPM @ 60PSI
 P10  Turbine type pump SS 20 GPM @ 60PSI
 P11 Centrifugal type pump SS 10 GPM @40 PSI
 P12  Centrifugal type pump SS 15 GPM @40 PSI
P13 Centrifugal type pump SS 20 GPM @40 PSI
P14 Magnetically coupled SS pump 2 GPM @ 80PSI
P15 Magnetically coupled SS pump 4 GPM @ 80PSI
P16 Centrifugal type pump SS 30 GPM @ 60 PSI
HOSE KITS 
HK1 1/2″ id opaque hose push-lok type 10′, 25′ or 50′
HK2 3/4″ id opaque hose push-lok type 10′, 25′ or 50′
HK3 1/2″ id opaque hose push-lok type 10′, 25′ or 50′ with 3/8″ wall thermal insulation
HK4 3/4″ id opaque hose push-lok type 10′, 25′ or 50′ with 3/8″ wall thermal insulation
HK5 1/2″ id opaque hose push-lok type 10′, 25′ or 50′ with 3/4″ wall thermal insulation
HK6 3/4″ id opaque hose push-lok type 10′, 25′ or 50′ with 3/4″ wall thermal insulation
Order hose as follows, HO1-25m would call out 25′ length, all hoses come with swivel fittings
FLUIDS
 EG ETHYLENE GLYCOL INDUSTRIAL GRADE 1 GAL
 EG50/50  ETHYLENE GLYCOL /WATER 50% MIXTURE INDUSTRIAL GRADE 1 GAL
 EG60/40  ETHYLENE GLYCOL /WATER 60/40% MIXTURE INDUSTRIAL GRADE 1 GAL
 HT110 GALDEN FLUORINATED FLUID FOR UP TO 100°C
 HT135  GALDEN FLUORINATED FLUID FOR UP TO 135°C
HT200  GALDEN FLUORINATED FLUID FOR UP TO 200°C
HT270  GALDEN FLUORINATED FLUID FOR UP TO 270°C
Other fluids available please ask your engineer or sales associate
REMOTE
RC 25″ NULL MODEN DB9 M TO F CABLE
USB1 USB TO SERIAL (RS-232) CONVERTER
CNVRT RS232 TO RS485 PORT POWERED CONVERTER
OTHER
OD NEMA 4x Electrical enclosure & weather proofing measures
OL Open Loop Plumbing configuration (for non-pressurized return)
-2 Dual channel system
-3 Three channel system
-4 Four channel system
-5 Five channel system
-6 Six channel system
19R Rack mount frame sliding mount rails
SR Seismic restraints with adjustable height for easy installation
If you don’t see what you are looking for, please ask the sales representative.  There are many other available features and pump options.
Not all options are available for all models, please consult BV Thermal Systems engineering or sales department for applicability.